The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a...

The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a the magazine, the PMAG Ranger Plate...

The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel...

The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a...

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the thumb break...

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible...

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the...

Clip-style sling attachment point for 1-1/4" webbing. Lockable, Melonite finished steel and reinforced polymer hardware. Compatible with ASAP Plate, RSA, MSA, SGA Receiver Sling Mount, and many other clip-in sling attachment points*. Combine with the MS1...

The Forward Sling Mount is a sling attachment point for the Remington 870 and Mossberg 500/590/Maverick series of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push-Button QD Sling Swivels or...

The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an...

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD...

The ASAP Ambidextrous Sling Attachment Point allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation for both left and right handed shooters. The ASAP replaces the standard AR15/M4 carbine stock receiver end...

This unique pouch is constructed from injection-molded polymer brackets, heavy-duty nylon and shock cord lacing to both expand and lock just about any magazine in place.• Securely holds most rifle magazines• Magazines deploy easily and silently...

MODEL 567BL INJECTION MOLDED BELT LOOP This 567BL injection molded polymer belt loop is designed for use on standard 3-hole pattern holsters. It can be adjusted for cant and allows for cross draw. FEATURES Can be used on any Safariland 3-hole pattern...

MODEL 567BL INJECTION MOLDED BELT LOOP This 567BL injection molded polymer belt loop is designed for use on standard 3-hole pattern holsters. It can be adjusted for cant and allows for cross draw. FEATURES Can be used on any Safariland 3-hole pattern...

CUBL CANTABLE BELT LOOP The Cantable Belt Loop (CUBL) allows the user to choose the cant position on their holster based on their preference. Extremely adaptable, the CUBL integrates with Safariland UBL products and 3-hole patterned holsters...

Rugged portable radio case that not wear out over time like stock leather cases or break like the bikini style clips that come with most Motorola radios.  These cases are secure, easy to clean and resistant to blood and chemical contaminants...

This ruggedized case for your ASP, Monadnock and other brand of collapsible batons will keep your baton secure and where you need it.  The baton case can be mounted to belts (from 1" to 2.25" duty belts) and molle vests, molle bags, backpacks etc...

This Crooked River knife brings a traditional shape combined with modern technology that pushes the preconceived notions of what a hunting knife should be. Made in USA...

The Bravo Concealment Torsion IWB concealed carry holster is designed to be the best Inside the waistband option for everyday concealed carry. Bravo Concealment takes comfort to a level you did not realize was possible. If you are a new or a seasoned IWB...

The Bravo Concealment Adaptive (BCA) OWB concealed carry holster is designed to be the best outside the waistband option for everyday concealed carry. Bravo Concealment takes comfort to a level you did not realize was possible. If you are a new or a...

Sublite Cushion Work achieves maximum lightness and flexibility in a work shoe. With deep flex grooves, the Sublite foam midsole reduces weight and allows for greater range of motion. Rubber pads with a slip resistant tread pattern provide traction at...

Sublite Cushion Work achieves maximum lightness and flexibility in a work shoe. With deep flex grooves, the Sublite foam midsole reduces weight and allows for greater range of motion. Rubber pads with a slip resistant tread pattern provide traction at...

INCLUDED CUSTOMIZATIONS (2) BADGE TABS installed (HI-VIS AND BLACK SIDE) PLEASE NOTE Any customizations to this jacket, including logo and patches are done at the Blauer factory and take approximately ~4-5 weeks. DETAILS Featuring Blauer's WaterBlock...

RESTRICTED ITEM This item is restricted to Law Enforcement only. You must provide us proof of Law Enforcement ID to purchase. After completing your purchase, please email us with a copy of your Law Enforcement ID and your order number. Please read our...

At a whopping 1300 lumens, this USB rechargeable and cradle-mounted LED flashlight is guaranteed to perform and shine bright through any job, meeting the serious technical and functional needs of professionals everywhere. Precision engineered to meet the...

For firearms that are converted to use paint marker training ammunition, Otis offers the Reality Based Training Cleaning Kit. Training in as real-life simulated scenarios as possible is incredibly important and so is maintaining those training guns...

For firearms that are converted to use paint marker training ammunition, Otis offers the Reality Based Training Cleaning Kit. Training in as real-life simulated scenarios as possible is incredibly important and so is maintaining those training guns...

SMART FIREARM TRANSPORT Designed to carry and protect your 36” rifle. With durable 500D nylon exterior and 10mm closed cell foam for padding, you can be confident in your firearm’s care. Straps are silent locking, and carrying handles are...

A very Handy Ammo or Accessories case with the benefit of being fully waterproof. The full length o-ring seal keeps the box air tight to prvent dust and other fine unwelcome objects from entering. SPECIFICATIONS EXTERIOR: 13.7 x 7 x 8.7" INTERIOR: 11.2...

Sam Browne Style Buckle to fit 2 1/4" Duty Belt

578 - GLS™ PRO-FIT™ HOLSTER, PADDLE & BELT LOOP COMBO The Model 578 GLS™ Pro-Fit brings the unique GLS™ (Grip Lock System) and SafariSeven™ together in a holster designed to fit a wide variety of guns. The Pro-Fit™...

The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to...

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow V shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard...

Internal core unit for the MIAD Pistol Grip as well as the MOE, MOE-K2, and MOE AK Grips. Designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push...

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one...

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive...

The Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely and canalizes sling...

The RSA QD provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point...

The QD Paraclip Adapter fits push-button QD swivel sockets to allow use with Paraclips and other clip-in sling attachments. Made from precision-cast Melonite finished steel. Made in U.S.A. FEATURES Adapts push-button QD swivel sockets for use with...